Classicnewcar.us


fluke MT-8200-60-KIT + MT-8203-20 + MT-8202-05 intellitone

fluke MT-8200-60-KIT + MT-8203-20 + MT-8202-05 intellitone

  Streamline verification testing The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once – graphical wiremap, pair lengths, distance to fault, cable ID, and far end device.  What’s more, its integrated RJ11, RJ45, and coax cable test ports support virtually any type of low-voltage cable testing with no need for awkward adapters.  The end result is reduced test time and technician error.  That makes high-quality installations more efficient than ever. Rule out service problems fastToday’s communications technicians have a lot more problems to deal with than just the cabling.  They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem.  Is there telephone voltage?  What’s the polarity?  Is there an Ethernet switch at the far end?  Is PoE available?  MicroScanner2 acknowledges this, giving technicians high power vision to verify today’s most common voice, data, and video services.   That means faster, more comprehensive troubleshooting.Streamline verification testing The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once – graphical wiremap, pair lengths, distance to fault, cable ID, and far end device.  What’s more, its integrated RJ11, RJ45, and coax cable test ports support virtually any type of low-voltage cable testing with no need for awkward adapters.  The end result is reduced test time and technician error.  That makes high-quality installations more efficient than ever. Rule out service problems fastToday’s communications technicians have a lot more problems to deal with than just the cabling.  They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem.  Is there telephone voltage?  What’s the polarity?  Is there an Ethernet switch at the far end?  Is PoE available?  MicroScanner2 acknowledges this, giving technicians high power vision to verify today’s most common voice, data, and video services.   That means faster, more comprehensive troubleshooting.Yesterday’s cable verification testers force users to toggle between up to four different modes of operation to view all test results.  This not only slows the test process, but also causes frustration and leads to high user error rates.  MicroScanner2 has defeated this convention by displaying key test results – wiremap, pair lengths, distance to fault, cable ID, and far end device – all on one screen.  Plus it features an oversized, backlit LCD screen with the power to display wiremap results graphically, which brings unprecedented comfort and clarity to the user experience.Tired of losing or breaking all the adapters needed for testing the various voice, data, and video media types?  MicroScanner2 makes these awkward adapters things of the past with built-in RJ11, RJ45, and coax support.  Both the main unit and the far-end identifiers can be used to test telephone jacks, Ethernet jacks, and CATV outlets right out of the box.  Just one more way MicroScanner2 streamlines cable verification. MicroScanner2 features built-in IntelliTone digital and og toning to precisely locate virtually any cable or wire pair, regardless of work environment.  Use digital mode to locate high-grade data cabling (Cat 5e/6/6a) in bundles, or at switches, patch panels, or wall outlets.  Digital mode especially performs in environments with high data, RF, or electromagnetic interference.  When coupled with the IntelliTone 200 Pro Probe, it can also be used to verify cable wiremap from either the tester end or the probe end. Use og mode on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring.  These cables are optimized for lower frequency transmissions, and therefore are more easily isolated with a low-frequency tone.  MicroScanner2’s smart og tone eliminates frustrating guesswork locating individual wire pairs during installations by changing songs each time the pair under test is shorted together.  This provides technicians a decisive way to identify individual wire pairs before punching them down or when diagnosing voice transmission problems. Voice, data, video technicians have a lot more problems to deal with than just the cabling.  They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem.  MicroScanner2 acknowledges this, giving technicians high power vision to detect today’s most common service problems.   Detect the presence of POTS voltage and verify polarity.  Verify powered 10/100/1000 Ethernet switches at the far end.  Or, confirm proper PoE voltage and pairs. With all the abuse you put your tools through, you can’t afford for them to be delicate.  MicroScanner2 features a rubber wrap-around holster that makes it the right tool for even the toughest jobs.  Toss it into your toolbox.  It can handle it.  Plus, it now comes standard with a vinyl carry pouch for enhanced protection and convenience. Copper and Fiber Basic Technician’s Kit – Includes the MicroScanner (MS2-100) and SimpliFiber Pro (FTK1000) Fiber Test Kit. See Photo Specifications   Test Connectors Twisted-pair: UTP, FTP, SSTP 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs; Coax: F-connector for 75 Ω, 50 Ω, 93 Ω cables Cable Tests Length (460 m or 1500 ft. with resolution to 0.3 m or 1 ft.), wiremap to TIA-568A/B standards, remote ID locators; displays results on one screen Tone Generator IntelliTone digital tone: [500 KHz]; og tones: [400Hz, 1KHz] PoE Detection Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices Ethernet Port Test Advertised speed of 802.3 Ethernet ports (10/100/1000) Power Source Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries Battery life: 20 hours of typical use Other compatible battery types: 2 AA photo lithium, NIMH, NICAD Dimensions 3 in x 6.4” x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) Weight 0.8 lbs. (363 grams) Display Monochrome liquid crystal display (LCD) with backlight Calibration User-configurable NVP for twisted pair and coax; determines actual NVP with known length of cable Operating Temperature 32 °F to 113 °F (0 oC to 45 oC) Storage Temperature -4 °F to +140 °F (-20 oC to +60 oC) Operating Humidity 90 % (50 °F to 95 °F; 10 oC to 35 oC) (%RH without condensing) 75 % (95 °F to 113 °F; 35 oC to 45 oC) Shock Vibration Meets requirements for MIL-PRF-28800F for Class 2 random vibration; 1 m drop test with and without wiremap adapter attached Safety EN 61010-1 2nd Edition Altitude 4000 m; Storage: 12000 m EMC EN 61326-1 Agency Certifications N10140 C-Tick EMC standard; FCC Part 15 Class A; CE European Union Directives Pollution Degree 2 Warranty One year Test ConnectorsCable TestsLength (460 m or 1500 ft. with resolution to 0.3 m or 1 ft.), wiremap to TIA-568A/B standards, remote ID locators; displays results on one screenTone GeneratorIntelliTone digital tone: [500 KHz]; og tones: [400Hz, 1KHz]PoE DetectionSolicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devicesEthernet Port TestAdvertised speed of 802.3 Ethernet ports (10/100/1000)Power SourceBattery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries Battery life: 20 hours of typical use Other compatible battery types: 2 AA photo lithium, NIMH, NICADDimensions3 in x 6.4” x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)Weight0.8 lbs. (363 grams)DisplayMonochrome liquid crystal display (LCD) with backlightCalibrationUser-configurable NVP for twisted pair and coax; determines actual NVP with known length of cableOperating Temperature32 °F to 113 °F (0 oC to 45 oC)Storage Temperature-4 °F to +140 °F (-20 oC to +60 oC)Operating Humidity90 % (50 °F to 95 °F; 10 oC to 35 oC)(%RH without condensing)75 % (95 °F to 113 °F; 35 oC to 45 oC)CableIQ™ Qualification TesterMicroMapper™ Wiremap Tester



The network tech's vision into cabling bandwidth CableIQ qualification tester is the first cabling bandwidth tester for network technicians. This Ethernet network cable tester gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.Reduce escalated problems by as much as 30% CableIQ qualification tester's powerful network troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your network infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a Ethernet cable problem? Can the Ethernet cable support the required network bandwidth? CableIQ network yzer is the only Ethernet cable tester that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%. The network tech's vision into cabling bandwidth CableIQ qualification tester is the first cabling bandwidth tester for network technicians. This Ethernet network cable tester gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.Reduce escalated problems by as much as 30% CableIQ qualification tester's powerful network troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your network infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a Ethernet cable problem? Can the Ethernet cable support the required network bandwidth? CableIQ network cable tester is the only Ethernet cable tester that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%. When you deploy Voice over IP (VoIP) or Gigabit Ethernet, you want to make sure that the existing cabling will support the bandwidth requirements of your new equipment. Your cabling was certified, but moves adds and changes have rendered many links incapable of running desired speeds. CableIQ quickly reveals whether a link, including patch cords, is qualified for voice, 10/100BASE-T, VoIP, or Gig. Knowing your cabling's bandwidth capabilities before upgrading can prevent countless hours of future downtime and labor hours wasted on unnecessary troubleshooting.   See what speeds your existing cabling can support. CableIQ's four-second Autotest clearly indicates with a check mark which speeds and applications the tested cable can run.Plug into any cable, patch panel, or wall jack and see both the cable details (length/wiremap) and far-end device details (speed/duplex settings) at once. A series of both cable and network test functions help you isolate connectivity problems. For instance, if Discover mode shows duplex settings are matched but the problem persists, run Autotest to see if the cabling can support the required bandwidth. If a link is not qualified, CableIQ provides detailed information on the nature and location of cabling performance faults such as crosstalk or large impedance changes. With CableIQ your techs can close trouble tickets faster by cutting cable troubleshooting time in half. Troubleshoot cabling faults in half the time. This screen shot represents a cabling link that did not qualify for 1000BASE-T because of a connection fault at 4.1 meters.CableIQ's Discover mode shows you exactly what's at the far end of any cable. At the switch, test each cable one at a time. You can quickly see whether the cable is open at the far end, or is connected to a PC. Or use CableIQ's hub blink feature from the workstation to flash the corresponding switch port LED. You may be surprised at how many unused ports you can free up and redeploy using CableIQ.Determine where installed cables are routed, all from one location.Attach remote ID's in different locations, then perform multiple cable tests from the distribution center or wiring closet. CableIQ provides the wiremap, pair lengths, distance to fault, and remote ID number of each tested cabling link.Intelligent wiremap tests for length, shorts, split pairs, or opens and displays with an intuitive graphical interface where a fault is located. CableIQ's Intelligent Wiremap shows pin 6 open at far end of tested cable (130 ft/34 meters).CableIQ supports IntelliTone digital toning by:Intuitive user interface and graphical display guides user with little or no training required.Customer quote: "I handed CableIQ to our level III techs, they turned the unit on and began testing within two minutes of reviewing the various available selections." --Telecommunications yst To maximize the value of your CableIQ ownership, choose one of our specialized kits. Each kit is tailored for qualification testing in specific work environments. Read on for detailed descriptions of each kit. CIQ-KRQ, CableIQ Residential Qualifier KitThe CableIQ Residential Qualifier Kit is designed for residential installers who need to document that cabling systems were installed properly and will perform reliably. It quickly qualifies home cabling networks to support voice, VoIP, 10/100/1000 Ethernet, and CATV. With included adapters, it replaces multiple tools for testing and troubleshooting all voice, data, audio/video, coax, and security wiring. Included CableIQ Reporter software allows installers to begin generating professional test reports immediately. CIQ-KIT, CableIQ Advanced IT KitThe CableIQ Advanced IT Kit is designed to maximize the efficiency of any cable qualification job. Use the included IntelliTone 200 Probe to find cables quickly and definitively, even on active networks. Use the included six smart cable IDs to perform a high volume of qualification tests in a short period of time. Each smart ID has the capability to perform a simple wiremap test or a full qualification test. Up to seven qualification tests can be performed without returning to the patch panel. The rugged carry case can be used to easily transport tools from one job to another. CIQ-FTKSFP, Copper and Fiber Technician’s KitThe Copper and Fiber Technician’s Kit is designed for the IT professional that works with both Copepr and Fiber Networks. It offers all of the advantages of the Advanced IT Kit but it also provides a way to test and verify your fiber connections with the Simplfiber Pro Power Meter and Light Source.  Qualification is a new category of testers designed to meet the emerging needs of network technicians who need to upgrade to higher network speeds as well as troubleshoot connectivity problems. Qualification testers, like Fluke Networks new CableIQ Qualification Tester, determines if an existing cabling link can or can not support certain network speeds and technologies. This differs from certification testers, like the DTX Cableyzer, which guarantees cabling installations comply with TIA/ISO performance standards and basic verification testers, like the MicroScanner Pro, which tests if the cable is connected correctly. Qualification testers allow network technicians to perform a series of troubleshooting steps to better isolate cabling from network problems. For example, a first step in troubleshooting a network connectivity problem might be to check the speed and duplex settings of connected devices. If the tester shows the settings are matched, but the problem persists, a qualification test can be performed. Performing a qualification test will allow the technician to identify whether insufficient cabling bandwidth is the cause of the problem. Knowing your cabling's bandwidth capability allows you to close trouble tickets faster and helps ensure seamless upgrades to higher network speeds. Choosing the right tool for the jobWhen to use a qualification tester: If you are a network technician, and need to see whether the existing cabling will support your 1000BASE-T network, a qualification tool is the right choice. If you need to troubleshoot connectivity problems and isolate cabling problems from network problems, then qualification is the perfect solution. If you have an existing network and are doing small adds, moves, and changes, or are setting up a temporary network and just need to qualify it for a specific network technology, a qualification tool is a good option. When to use a certification tester: If you're a commercial installer or network owner who needs to prove that all cabling has been installed correctly, and meets TIA or ISO link specifications, you must certify it. If you are in a troubleshooting environment, and need to show unequivocally that the link under test is failing category 5e or 6 performance requirements according to TIA or ISO standards, your only choice is a certification tool. If you have a mixture of fiber and copper cabling, and often need to test both, cable certification tools do that best. To receive the support and financial security of a manufacturer's warranty, certification to TIA/ISO standards is your only option. Anything else makes the installer liable for the performance of the installation which can be quite costly. For example, a large 1000 link installation could represent a $100,000 (USD) project, which can be a hefty liability if manufacturer warranty is not obtained. When to use a verification tool: Verification tools are typically used by any technician who pulls and terminates cable or performs basic moves, adds and changes. These tools are used as a first line of defense in finding connection and wire-pairing faults.CableIQ, RJ-45 patch cord (2), RJ-11 patch cord (2), bare wire adapter, speaker wire adapter, coax cable, coax BNC adapter, coax RCA adapter, “Qualified” labels (50) and a soft carrying case See PhotoCableIQ Service Kit includes CableIQ Qualification Tester, six CableIQ Remote Identifiers, CableIQ Reporter software CD, RJ45-RJ45 shielded patch cords (2), USB cable, coax “F” push-on cable, RJ45/RJ11 universal coupler, LinkRunner Network Multimeter, LinkRunner main wiremap adapter, Intellitone Digital Probe 200, test accessory soft pouch, owners CD and quick start guide, packaged in a rugged carrying case; one (1) 9V and six (6) AA batteries included. See Photo*This SKU has been discontinued but product support will continue through September 23, 2017 CableIQ Advanced IT Kit Includes CableIQ main unit with remote adapter, CableIQ Reporter software CD, IntelliTone 200 Digital Probe, Remote IDs #2-7, (2) RJ45-RJ45 patch cord, USB cable, coax 'F' push-on adapter, 75-ohm coax patch cord, RJ45/11 universal coupler, RJ11-RJ11 patch cord, owners CD and quick start guide, (4) AA batteries, test accessory soft pouch, duffel style bag. See PhotoCopper and Fiber Technician’s Kit – Includes the CableIQ (CIQ-KIT) and SimpliFiber Pro (FTK1000) Fiber Test Kit. See PhotoCable types supported UTP, STP, FTP, SSTP, RG6, RG59, audio and security Qualification autotests 1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax Supported tests Wiremap, length, cable signal performance, digital toner, og toner, Ethernet port detection and identification, og telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection. Wiremap Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs. Find fault Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application Results storage Up to 250 qualification test results Power Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries Battery life 20 hours of typical use, without backlight Other battery types supported 4AA photo lithium, NIHM, NICAD Dimensions and weight 7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg) Gold Support for your CableIQ Qualification Tester allows you to make the most of your purchase while ensuring a higher return on your investment. You will minimize your downtime, receive faster trouble resolution and have total access to all support resources.What do you get with Gold Support for your CableIQ Qualification Tester?Repairs and loaner equipment - If your CableIQ should fail, we'll deliver a loaner unit via next business day delivery to keep you up and running.  We'll repair your CableIQ and replace defective or faulty accessories at no charge, with first on bench" priority, and return it to you - all shipping paid by Fluke Networks.Access to live 24 x 7 technical support - Extend the expertise of your staff. Gold Support includes direct, immediate telephone access to our world-class Technical Assistance Center (TAC), direct access only available to Gold Members. Our centers in Seattle, WA and Eindhoven, NL employ a full staff of highly trained technical experts that are on call, including weekends and through the night when most network changes are implemented, to answer complex troubleshooting questions helping you get the most out of your CableIQ and understand the results you are seeing.Accessory Replacement - Some accessories are essential to your CableIQ. The normal warranty on accessories is 90 days, but parts and accessories that shipped with your tester will be replaced free of charge with Gold Support once qualified as defective by our technical assistance center.Unlimited access to our Knowledge Base - You'll have an open door to valuable proprietary information we've gathered from helping customers over the years. It also includes helpful technical articles written by our experts.Member Only promotions - Your membership qualifies you for Members Only promotions and programs. This includes product discounts, access to reconditioned equipment at special prices and other incredible values.Ensure that you are getting the most out of your CableIQ Qualification Tester with Gold Support Services. DSX Cableyzer™ Series Copper Cable CertifiersIntelliTone™ Pro 200 LAN Toner and ProbeMicroScanner² Cable Verifier





#Contact US #Terms of Use #Privacy Policy #Earnings Disclaimer